Do you want to know how to lay modular floor tiles? Compared to regular tiles of the same size arranged in a strictly linear fashion, the look of modular tiles is an excellent way to add more interest to any flooring.
These tiles are just like any other, so they can be used in any room and make a beautiful backdrop for interiors in any style. They do not need to be cut, and they are often sold in packs of various sizes already prepared for use.
You can achieve either a natural and rustic look or an elegant and contemporary look by using modular tiles. However, before you begin laying these out, there are a few things you need to keep in mind.
To begin, you will have to plan the floor space more carefully than you would if you were working with linear patterns, which can be more difficult. You will need to decide where the first tile should go, mark a centre line and begin working from that point.
Because the tiles are intended to be placed next to each other in a particular manner, at least a portion must be laid out before the beginning of the work. This will provide you with a general idea of the size of each part of the pattern.
Advantages of laying modular floor tiles
- There are no jagged edges.
- Well worth the purchase price.
- Floors and walls that is both sturdy and long-lasting.
- Requires little to no upkeep.
- Able to withstand moisture and not absorb stains
- Prevents the growth of mould and harmful bacteria.
- The setup is straightforward; after approximately four days, it can be put to use.
- Provides an excellent economical alternative to marble and granite • Can be purchased in a variety of sizes and thicknesses
Tools required for laying modular floor tiles
- Steel brush
- The round and chubby bob
- Levelling tube
- Should I use a straight edge or one with a right angle?
- Strings
- Trowels
- A device that performs cutting with a wet blade
- Wooden hammers and nails of the same material
- Separators (Spacers)
- Measuring tape
- Tile nippers
- Buckets
Step by step guide to follow for laying modular floor tiles
First, you’ll need to get the surface ready
The surface should be tightly compacted and given sufficient time to dry to become robust enough to support the weight. There should be spaces that are tight enough.
The second step is to prepare the subgrade
When it comes to the subgrade for concrete, there should not be any foreign materials or loose pieces.
When it comes to water, the surface ought to be SSD (Saturated Surface Dry). Markings and distributions of level pads for the finished floor should be carried out evenly, considering the required slope (in the case of floor tiles in a bathroom or terrace).
The third step is to place tiles on the surface of the area
A mortar bed with a thickness of 30-40 millimeters can create by using a cement and lean mixture ratio of 1:8. Reduce the amount of rich mix used.
- Cement slurry should be applied to the surface at approximately 3 kilograms per square meter.
- Using the reference lines, modular tiles are laid out in a straight line, the level is checked, and a right angle is maintained throughout the process.
- To determine how well the tiles go together, use the dot points as a guide.
- When it comes to skirts, the tiles adjacent to the wall should be spaced 12 millimeters away from the wall.
- After installing the tiles, you should use a wooden mallet to give them a few light taps to ensure they are level.
- You should use spacers to keep the tiles aligned.
- Spacers remove any air or excess cement that may be trapped under the tiles.
- The next step is to let the surface air dry.
Work after tiling
After the floor has had time to dry, it should be cleaned thoroughly. After three days, when you shouldn’t move your feet around too much, cover the tile floor with a bubble sheet or POP Sheet to prevent it from getting scratched.
During this time, the floor should also be as dust-free as possible. As we move closer to assuming control of the unit. White cement or grout is a colour complementary to the tiles and is used to fill the voids left between the tiles.
The floor must be washed and cleaned once it has completely dried out before it can be considered clean.
Frequently Asked Questions
What do modular floor tiles look like?
Covering outdated, dirty, or improperly finished concrete with modular floor tiles is a simple and quick way to achieve the desired effect. You can create a new and contemporary custom floor space for your home in only a few hours.
Is it acceptable to lay tile directly on concrete?
It is acceptable to install tile directly on concrete, but you should keep a few things in mind before doing so. Your first order of business is to determine whether or not there is any moisture rising from the slab.
Is it possible to install tile directly onto a plywood subfloor?
Tile can be installed as directly on top of a concrete slab using thin-set glue; however, it is important to avoid making the common mistake of installing tile directly on a plywood subfloor. Regardless of how stable the subfloor is, the plywood will expand and contract at a different rate than the tile.
Conclusion
Not only are modular tiles wonderful for use on floors, but they also look fantastic when applied to walls, particularly in contemporary bathrooms.
In contrast to installing walls, installing modular flooring will have gravity working in your favor, even though it can be challenging. It is strongly suggested that you seek the assistance of an expert with this matter. In the end, the money that was spent will be completely justified.